Opal Tie

Step 1

The best thing to do with a necklace like this is to lay it out first. I began with laying out the main large components of the "tie", knowing that I wanted to fill in between those components with with simple rows of seed beads.

Step 2

Once the layout for the necklace is done, cut your chain in half, setting aside the extra opal beads. Wire wrap the Patricia Healey Copper Curved Textured Tube Bead to each end of the chain. This will act as the anchor for the necklace.

Step 3

Attach your 2 rows of czech drops by wire wrapping them to the chain as they were laid out. Make sure to add a seed bead or 2 in between each drop. This will keep the drops lying flat.

Step 4

Now comes the time to use the 2 shorter lengths of silk string. Knot the silk to the chain, string on the Patricia Healey Copper Triangle Arc and knot to the chain on the other side. If you are having trouble getting the silk string to go through the triangle arc, either use a collapsible needle or take a piece of your wire folding it in half and twisting your silk to it. Once you have done the one triangle arc, repeat stringing on the other triangle arc.

Step 5

Now that all of the main components are connected to the chain, you can go back in and fill the gaps with rows of seed beads. This is also where you can use the left over opal beads from you chain.

See Tip: Wire Wrap a Bead Link

Step 6

Finish your necklace by taking 2 6" lengths of 24 gauge wire, wrapping each to an end of chain. Create another loop close to the one connected to the chain and string the leather and silk cord through it. Make sure that you leave a 1/2" tail of leather and a 2-3" tail of silk cord at each end, keeping in mind that in the supporting part of the necklace, they need to be even. Now that the leather and silk have been strung through the loop, dab a touch of adhesive and wrap the wire around and around until it is all used. When you are done wrapping the wire, begin wrapping the silk string around the leather tail and the supporting leather and silk. Finish off the will wrapping with a knot. Repeat at the other end.