Honey Bee Earrings

Step 1

Slide the bee coin onto the eye pin and create a loop at the top with your round nose pliers. Follow the tip below, if needed for creating the perfect loop.

Step 2

Cut a 2" piece of wire and slide one end through a honeycomb hole. Bend the wire in an L-shape on the back of the honeycomb so you can wrap the wire over it. Wrap the wire around twice and then slide a 2mm bead on. Wrap the wire around twice on the other side and trim your wire. Do the same technique to any honeycomb holes you want to fill. You can use a little dot of super glue to secure the wire on the back.

Step 3

Slide one 2mm bead onto a head pin to create the little honey droplet to hang from the bottom. Attach to the honeycomb with a jump ring.

See Tip: Wire Wrap a Charm

Step 4

Attach the bee link to the honeycomb with a jump ring, then to the ear wire.