Green with Envy Necklace

Project details:

Beautiful green fluorite points are on full display. With a little chain fringe that sparkles and a golden coin layer this necklace will be your go to accessory.

↓ Step-by-step

↓ Buy the supplies

Supplies you’ll need:

green fluorite points
4' 14K gold filled chain if doing both layers. I listed two styles to pick from below.
jump rings
hook and eye clasp
greek gold coin
24-22 gauge wire

Step-by-Step Instructions:

Step 1

Cut an 8" piece of wire. Cut 2 pieces of chainranging from the shortest 4 links, then 5 links, then 7 links, and the longest 9 links. You will only need 9 link chain for the center. String on a point then a piece of chain in between each point from longest in the center to shortest. You should have 10 points strung onto the wire with chain in between.

Step 2

Use pliers to create a loop on each end of the gemstones. Trim any excess wire. Use jump rings to attach this bead link to the chain.

See Tip: Wire Wrap a Bead Link

Step 3

My bead link necklace is 18" and my coin necklace is 22". Cut your chain to the length that lays best on you. Use jump ring to connect the chain and clasp.