Enchanted Heart Earrings

by AndreaP at Lima on 02/05/26

Project details:

Red hearts are wire-wrapped with a herringbone pattern, giving a modern edge to this earring design.

↓ Step-by-step

↓ Buy the supplies

Supplies you’ll need:

Czech glass hearts
24 gauge wire
endless hoops
round-nose pliers and wire cutters

Step-by-Step Instructions:

Step 1

Cut 10" of wire. Create a loop about 4" down from the end of the wire. Wrap the short wire tail around the base of the loop 8 times. Trim the wire.

Step 2

Slide on a heart bead.

Step 3

Hold the bead between your fingers to help guide the wire around it. Bring the wire tail up around the right side of the bead, while pushing on the wire to shape it around the bead. Bring the wire around the front bottom part of the coil. Bring the wire around the coil until it gets to the front.

Step 4

Bring the wire around to the left side, down, around the bottom of the bead, and back up around the front of the center coil. Repeat Step 3. I repeated Steps 3-4 three times.